WE CARE ABOUT YOUR SAFETY

We are dedicated to deliver personal ballistic protection solutions.

The inherent benefits to our customers are physical reliability, simplified, servicing requirements and ready availability of parts and maintenance facilities.

We close cooperate with International manufacturers and we fully represent high quality bullet resistance and stab protective products as our philosophy is to always have only satisfying users in worldwide basis.

We care and we are protecting your life through a wide range of special ballistic protection products for Police, Military, Governmental Organizations, Commercial Companies and Civilians.

All our products are produced under International standards and are complying all rules and regulations of NIJ, ISO 9001, AS 9100  while all products are tested and certified as conforming to the highest level of performance and compliance by the leading certification agencies across the world.
Tactical Bulletproof - Full protection

NIJ IIIA for 9mm and .44 Mag mentioned in the Protection Level Column refers to the following ammunitions: .40 S&W, .357 Magnum, 9mm FMJ RN bullets, .44 Magnum SJHP bullets.

(Kevlar, PE, Dyneema)

JTIC Ballistic Armor Compliant
Tactical Bulletproof - Full protection
Bulletproof Set Level III or IV

NIJ IIIA for 9mm and .44 Mag mentioned in the Protection Level Column refers to the following ammunitions: .40 S&W, .357 Magnum, 9mm FMJ RN bullets, .44 Magnum SJHP bullets.
Bulletproof Set Level III or IV
Tactical Style Bulletproof Vest

NIJ IIIA for 9mm and .44 Mag mentioned in the Protection Level Column refers to the following ammunitions: .40 S&W, .357 Magnum, 9mm FMJ RN bullets,  .44 Magnum SJHP bullets.

(Kevlar, PE, Dyneema)

JTIC Ballistic Armor Compliant
Tactical Bulletproof
Molle Plates Carrier

This lightweight, high quality plate carrier has great load carrying capacity.

Designed for protection, utility, mobility in a compact lightweight design.

Ideal gear for Law Enforcement patrol officers for use in High Threat active shooter situations, Multi-Assault Counter Terrorism Action Capabilities (MACTAC) and Counter Terrorism direct actions. National Tactical Officers Association (NTOA) Member Tested and Approved.

MOLLE Webbing in front and rear
Front/Rear/Side pockets for ceramic plate
Removable washable outer cover
Adjustable shoulders and side
Out Cover Material 500D cordura
Molle Plates Carrier
COMPACT PLATE CARRIER WITH FRONT AND REAR MOLLE SYSTEM

Velcro for front and rear patch.
Side closing system with straps and plastic buckle.
Adjustable sides and shoulders..
Pockets for internal plates with velcro closure..
Padded for greater comfort
VEGA 2ET11 PLATES Carrier Molle
Armour Concealable (IIIA NIJ 0101.06)

NIJ IIIA for 9mm and .44 Mag mentioned in the Protection Level Column refers to the following ammunitions: .40 S&W, .357 Magnum, 9mm FMJ RN bullets,  .44 Magnum SJHP bullets.
NIJ 01.01.06 - Protection Lever IIIA
The lightest, thinnest carrier on the market, this vest is the benchmark for concealable armour.
Weight 1.8Kg
Protection Area 0.28-0.34m2
Armour Concealable (IIIA NIJ 0101.06)
Special Forces Molle Plates Carrier

This lightweight, high quality plate carrier has great load carrying capacity.

Designed for protection, utility, mobility in a compact lightweight design.

Ideal gear for Law Enforcement patrol officers for use in High Threat active shooter situations, Multi-Assault Counter Terrorism Action Capabilities (MACTAC) and Counter Terrorism direct actions. National Tactical Officers Association (NTOA) Member Tested and Approved

500D, 600D or 1000D Cordura as will be requested
Military forces and police, security service
Resistant to steel pricker, three-square blade and flick knife
Average penetration strength >1000N
Strong stitching and strong hook and loop on back
Waterproof, breathable, removable accessories, ultraviolet-proof
Vest could be put with protection panels to cover the front, back
Color as will be required
Special Forces Molle Plates Carrier
We cooperate in close and under contractual agreements with the most known international manufacturers of ballistics in order we keep you safe and secure.
Tactical adjustable molle plate carrier of 1000D Nylon material

Resistant to steel pricker, three-square blade and flick knife
Average penetration strength > 1000N
Polyvinylchloride coated
Shoulder straps: 100% Thermoplastic Rubber
Waterproof, breathable, removable accessories, ultraviolet-proof
Molle-Loop-System on front, back and on side straps
3 magazine pouches on front
3 elastic loops on front to fix the magazines
small hook and loop closure pocket on front
3 hook and loop closure stripes on front to fix patches
possibility to open the vest completely on front by 3 big, strong hook and loop closures - shoulder straps can be opened by hook and loop closure
- fast put on and remove of vest by elastic-loop-system on back
- front and back plates ceramic level III and IV are suitable for this vest

Our Lightweight Plate Carrier Vest is not your typical plate carrier vest, weighing in at just over 1 pound this tactical vest offers superior weight savings, mobility, and ventilation for the user.

The front of the tactical vest features three rows of MOLLE loop material, three pistol mag slots at the top center and three rifle mag slots both with elastic separators & elastic cord and hook & loop closures. In addition, the front features an integrated MOLLE system with three rows of MOLLE webbing for attaching MOLLE pouches and gear.

The back of the vest features six rows of MOLLE webbing. A skeletonized MOLLE cummerbund system is designed to ensure optimal fit, minimal weight and added ventilation with three rows of durable plastic reinforced MOLLE webbing.

The vest is fully adjustable with two elastic cords for attaching to the backside of the vest and 5″x5″ panel with loop front and hook back.

The shoulder straps are also adjustable with a soft material covering the hook & loop straps, and the straps are fitted with hook & loop tags for attaching a hydration hose.

Both the inside front and back panels are equipped with a stretch mesh material for added comfort and ventilation.
Tactical adjustable molle plate carrier of 1000D Nylon material

We supply military, security and Maritime Security  Companies with quality ballistic armor sets (Bulletproof vests, Helmets, Ballistic plates) and firearms in order they are safe acting against gun fires and especially against rifles AK 47

We manufacture all the offered goods to an approved Company that has been determined to comply with NIJ Standard–0101.06 by the NIJ Compliance Testing Program and is listed on the NIJ Compliant Products List. (www.justnet.org)
Safety First!
BALLISTIC PLATE CARRIER

MOLLE Webbing in front and rear
Front/Rear/Side pockets for SA ceramic plate
Removable washable outer cover
Adjustable shoulders and side
Panel Material Aramid UD Fabric (Kevlar)
Out Cover Material 500D cordura
Full Molle System
Front Badge Scratch
PLATE CARRIER
USE IT WITH  STAND ALONE (SA)
CERAMIC PLATES
FRONT / BACK and SIDE pockets for ballistic plates